Ideal for connection to caravans and motor homes using snap-on high quality brass fittings, our drink water hose is a scaled down fire hose with:
Our hoses are available in 10m and 15m lengths with Snap Fitting permanently attached to each end, supplied with one 1" converter/reducer (catering for both Australian tap sizes).
For instructions on how to wind the hose, see our 'Storage Reels' page.
Avoid driving over the flat hoses.There is no requirement to dry
the hose before storing on the reels.Do not pressurise any
waterhose when unattended.
There does not seem to be a uniform exterior fitting for water
tanks in motorhomes, caravans or boats. We offer the suggestion
below to assist you when filling your tanks.
Your campervan or motorhome will probably have an inlet that looks
something like this one.
Cut off approximately 300mm of ordinary drink water quality hose
and fit a standard snap fitting.
Use the connector to join the Flat Out hose and the ordinary hose.
Insert ordinary hose
in the tank opening; you are now ready to turn on the
water supply tap and quickly fill up your water tank